Temperature Gradient of Tin Oxide Electrode in Glass Electric Melting Furnace 稳态下玻璃电熔炉中锡电极的温度分布
Load Characteristics of Electrode Group and Power Supply Control System for Glass Melting 电极群熔化玻璃时的负载特性与供电控制系统
Application of Rapid Prototyping in Manufacturing of Electrode for Glass Mould 快速成型技术在玻璃模具电极制造中的应用
Classical methods of determining the mean ionic activity coefficient of the hydrochloric acid with hydrogen electrode are Laborious. The use of glass electrode affords a fast simple method for making this measurement. 用氢电极测定HCl溶液的平均活度系数是费事的,玻璃电极的使用提供了一个快速、简便的测量方法。
Thermodynamics Computing of Molybdenum Electrode Reaction with Glass Component 钼电极与玻璃电熔炉中各组份作用的热力学计算
Study and Application of Molybdenum Electrode for Electric Melting of Glass 玻璃电熔用钼电极的研究和应用
Study on the Corrosion of Electrode Materials in Iron Phosphate Glass Melts 电极材料在铁磷酸盐玻璃熔体内腐蚀现象的研究
Aiming at the production and development of the non-slag electrode, this article studies the parameters of water glass effecting on the quality of the non-slag electrode, which gives an efficient reference to produce electrode with high quality, high performance and low reject rate. 针对无渣焊条研制与生产,探讨了水玻璃的性能参数对所生产焊条质量的影响,从而为生产高质量、高性能、低废品率的焊条提供了有效的实践和理论依据。
For the measure-ment of pH value of air-dried soils, the difference between the micro quinhydrone electrode and the glass electrode was insignificant. 在应用微氢醌电极法测定土壤的pH时,对干土所得的结果与玻璃电极数值一致;
During the Cr/ Cu bottom electrode deposited, the effect of glass substance temperature on film micro-structure is analyzed. 在制备Cr/Cu底电极时,分析了基片加热温度对薄膜表面形貌的影响。
The experimental results indicate that the electrode process of VB 2 on the glass carbon electrode is a quasi reversible process with absorption and diffusion. 实验表明,VB2在玻碳电极上的电极过程为一受吸附和扩散同时控制的准可逆过程。
In this paper, we have prepared the chitosan modified glass carbon electrode and schiff base chitosan modified glass carbon electrode by using chitosan and its derivatives as a modified reagent and by applying the method of covalent-bond reaction. 本文以壳聚糖及其衍生物Schiff碱壳聚糖作为修饰材料,用共价键合的方法制成壳聚糖修饰电极和Schiff碱壳聚糖修饰电极。
Plate Molybdenum Electrode in The Electric Heating Forehearth of Glass Melting Furnace 板状钼电极加热玻璃窑炉供料道
This paper reports on the integration of planar reference electrode onto glass substrate through a combination of electroless deposition and electroplating. 本论文提出了用化学镀与电镀相结合的方法制作平面化的微参比电极,并对电极的寿命和性能进行了测试。
The copper paste for termination electrode of BME-MLCC is composed of organic vehicle, glass frit, copper powder and others. 贱金属片式多层陶瓷电容器(BME-MLCC)端电极用铜浆由有机载体、玻璃料、铜粉等组成。
A simplified mathematical model for electrode protecting system that involves molten glass, AZS refractories, insulating bricks, molybdenum electrodes, cooling water and jacket, etc. 建立了钼电极保护系统的数值模型,把该系统中涉及的电极、水套、冷却水、保温砖、AZS耐火砖、玻璃液等问题关联起来;
Using investment casting technology and the colophony prototype of the glass an electric spark machining electrode was made for machining glass mould. 利用熔模铸造技术和树脂原型来制作模具电火花加工的电极。
The optimum electrode gap is 4mm. And the most suitable configuration of electrode structure is electrode-sample-glass barrier-electrode. 确定采取电极间距为4mm,网电极孔径为2mm,电极配置为外电极处理试样玻璃介质内电极形式。
Using Rapid Prototype Technique to Make Electric Spark Machining's Electrode Used to Machine Glass Mould 用快速成形技术制造玻璃模具电火花加工电极
In this paper, the electrochemical behavior of GSH at the surface of platinum ( Pt) electrode, glass carbon ( GC) electrode and acetylene black packed powder microelectrode ( AB-PME) was studied. 研究GSH在铂、玻碳以及用乙炔黑填充的粉末微电极(ABPME)表面的电化学行为。
Mathematical Simulation of Mo Electrode Protecting System of Electric Melting Glass Furnace 玻璃电熔窑钼电极保护系统的数值模拟研究
Study on PVC Membrane Tribromophenol Electrode with Glass Electrode as Inner Conductive Electrode 玻璃电极作为内导电极的三溴苯酚PVC涂膜电极研究
Relation between Glass Compositions and Volume Conductivity in Electrode Glass 电极敏感玻璃成分组成与体积电导率之间的关系
A Study on Li_2O-BaO-SiO_2 System of Electrode Glass Li2OBaOSiO2系统电极玻璃的研究
Blood pH Measurement with a PVC Membrance Electrode in Comparison with a Glass Electrode PVC膜电极与玻璃膜电极测定血液pH性能比较
The working electrodes such as gold electrode, platinum plate electrode and glass carbon electrode have been researched to choose a proper one. 工作电极就金盘电极、铂盘电极和玻碳电极进行了研究和选择。
Now the platinum counter electrode on conductive glass is often prepared by different preparation methods. 目前多采用镀铂的对电极,即采用不同方法将铂镀在导电玻璃上。
First, a new type of counter electrode consisting of glass substrate, aluminum film and platinum film was proposed. 为此,提出两种新型对电极结构。第一种由基底材料、铝薄膜和其上的铂薄膜构成。
Form the Pt electrode in glass substrate using dry etching. And then dump a layer of PDMS glue on the top of platinum electrode, and bond with the PDMS cover. 3. 采用干法刻蚀,在玻璃基板上形成了Pt电极,然后在铂电极上甩了一层PDMS胶,与上盖片进行了键合。